Idler Stations (Frames)

Self-Aligning Idler

Name: Self-Aligning Idler
Brand: Ditaş
SKU: DTS-S04

Training idler that detects belt drift and steers the belt back to centre with a pivoting frame.

Product code: DTS-S04 Origin: Türkiye ISO 9001:2015 · CE

Request a quote for this product WhatsApp

Technical specifications

Specification	Value
Belt width	500 – 2000 mm
Type	Taşıyıcı / dönüş — carrying / return
Trough angle	20° · 30° · 35°
Frame	S235JR / S355JR steel
Surface finish	Powder coating / hot-dip galvanising

Values shown are our standard production range. All dimensions can be manufactured to your project requirements.

When the belt drifts, the side guide rollers make the self-aligning idler pivot about its centre and steer the belt back.

Installed at intervals on long conveyors, they markedly reduce spillage and edge wear caused by mistracking.

Idler Stations (Frames)

Carrying idler station that forms the loaded belt into a trough with a 3-roll (2- or 5-roll optional) arrangement.

Idler Stations (Frames)

Return idler station supporting the empty bottom strand, flat single-roller or 2-roll V type.

Idler Stations (Frames)

Reinforced impact idler station fitted with impact rollers to protect the belt and structure at loading zones.

Idler Stations (Frames)

Two-roll V return idler that helps centre the belt on the return strand.